「daily updating」k3s + openfaas serverless bench 踩坑指南持续更新中

OpenFaas从入门到实战 – 踩坑指南 ｜ k3d+OpenFaas | deploy your first python function

https://blog.alexellis.io/first-faas-python-function/

https://docs.openfaas.com/deployment/kubernetes/

搭建环境：第一种方法失败，第二种方法亲测有效嘻嘻嘻，其实我大概知道原因，但先不细究了

1. VM: K3s + OpenFaas on Mac

参考教程：https://midnightprogrammer.net/post/installing-openfaas-on-k3s-single-node/

MacBook Pro

使用 Multipass 来创建一个 VM：需要 4GB 内存和 8GB 磁盘，记得要分配多一点 - 我暂定的

beatles@biantongshusMBP ~ % multipass launch --name k3s --memory 4G --disk 8G 
Launched: k3s

等待 VM 创建，然后为 VM 启动一个 shell

multipass shell k3s

安装 k3s

curl -sfL https://get.k3s.io | sh -

After the installation is completed, you can check if the k3s service is running by executing the below command.

sudo systemctl status k3s

image-20240103190034976

​ 亲测无效，遂脚本自动安装：

curl -SLsf https://dl.get.arkade.dev/ | sudo sh

image-20240104190355723

谁说用着个很简单，总之我还自己凑了两个命名空间

arkade install openfaas

然后就是这样

Release "openfaas" has been upgraded. Happy Helming!
NAME: openfaas
LAST DEPLOYED: Thu Jan  4 19:51:37 2024
NAMESPACE: openfaas
STATUS: deployed
REVISION: 2
TEST SUITE: None
NOTES:
To verify that openfaas has started, run:

  kubectl -n openfaas get deployments -l "release=openfaas, app=openfaas"

To retrieve the admin password, run:

  echo $(kubectl -n openfaas get secret basic-auth -o jsonpath="{.data.basic-auth-password}" | base64 --decode)
2024/01/04 19:51:42 stderr: WARNING: Kubernetes configuration file is group-readable. This is insecure. Location: /home/ubuntu/.kube/config
WARNING: Kubernetes configuration file is world-readable. This is insecure. Location: /home/ubuntu/.kube/config

=======================================================================
= OpenFaaS has been installed.                                        =
=======================================================================

# Get the faas-cli
curl -SLsf https://cli.openfaas.com | sudo sh

# Forward the gateway to your machine
kubectl rollout status -n openfaas deploy/gateway
kubectl port-forward -n openfaas svc/gateway 8080:8080 &

# If basic auth is enabled, you can now log into your gateway:
PASSWORD=$(kubectl get secret -n openfaas basic-auth -o jsonpath="{.data.basic-auth-password}" | base64 --decode; echo)
echo -n $PASSWORD | faas-cli login --username admin --password-stdin

faas-cli store deploy figlet
faas-cli list

# For Raspberry Pi
faas-cli store list \
 --platform armhf

faas-cli store deploy figlet \
 --platform armhf

# Find out more at:
# https://github.com/openfaas/faas

🚀 Speed up GitHub Actions/GitLab CI + reduce costs: https://actuated.dev

check the rollout status of the gateway, After this we can forward the gateway to the machine.

ubuntu@k3s:/etc/rancher/k3s$ kubectl get pod -n openfaas
NAME                            READY   STATUS    RESTARTS      AGE
nats-5c48bc8b46-zksff           1/1     Running   2 (12m ago)   73m
alertmanager-795bbdc56c-6qwpn   1/1     Running   2 (12m ago)   73m
prometheus-78d4c9f748-smjfr     1/1     Running   2 (12m ago)   73m
queue-worker-b9965cc56-bn47b    1/1     Running   6 (12m ago)   73m
gateway-67df8c4d4-jfkbf         2/2     Running   0             73m
ubuntu@k3s:/etc/rancher/k3s$ kubectl rollout status -n openfaas deploy/gateway
deployment "gateway" successfully rolled out
ubuntu@k3s:/etc/rancher/k3s$ kubectl port-forward -n openfaas svc/gateway 8080:8080 &
[1] 4737
ubuntu@k3s:/etc/rancher/k3s$ Forwarding from 127.0.0.1:8080 -> 8080
Forwarding from [::1]:8080 -> 8080
jobs
[1]+  Running                 kubectl port-forward -n openfaas svc/gateway 8080:8080 &
ubuntu@k3s:/etc/rancher/k3s$

You can then view the password by printing the value of the PASSWORD variable using the echo command. 反正报错需要等一会儿就好了

ubuntu@k3s:/etc/rancher/k3s$ echo $PASSWORD
oJPdijCZF2Dd

192.168.64.1

http://localhost:31112/ui
http://127.0.0.1:31112/ui

2. Docker: K3d + OpenFaas

参考教程（版本较老，于是我自己做了一些记录）：https://mickey.dev/posts/getting-started-with-openfaas/#:~:text=Configure%20faas%2Dcli%20%26%20Login%20to%20the%20OpenFaaS%20Dashboard&text=Open%20a%20browser%20and%20navigate,for%20a%20username%20and%20password.

brew install k3d

Create a cluster named mycluster with just a single server node

k3d cluster create mycluster

You can now use it like this:

kubectl cluster-info

image-20240105215327074

事实上，这句话并没有什么用

export KUBECONFIG="$(k3d kubeconfig get --name='k3s-default')"

export KUBECONFIG="$(k3d kubeconfig get --all)"

To install OpenFaaS to your k3d cluster, start by cloning the https://github.com/openfaas/faas-netesrepo:

git clone https://github.com/openfaas/faas-netes.git
cd faas-netes

Install the namespaces:

kubectl apply -f namespaces.yml

This will create two namespaces in your cluster:

openfaas - Which will hold the OpenFaaS cluster services (AKA. ‘Control Plane”).
openfaas-fn - Stores the functions you deploy to OpenFaaS.

Create a password for the OpenFaaS Gateway and add it as a secret into the cluster. The below commands will generate a random password and add the secret:

beatles@biantongshus-MacBook-Pro faas-netes % export PASSWORD=$(head -c 12 /dev/urandom | shasum| cut -d' ' -f1)


beatles@biantongshus-MacBook-Pro faas-netes % kubectl -n openfaas create secret generic basic-auth \
--from-literal=basic-auth-user=admin \
--from-literal=basic-auth-password="$PASSWORD"
secret/basic-auth created
beatles@biantongshus-MacBook-Pro faas-netes %

Now deploy the OpenFaaS stack:

kubectl apply -f ./yaml

Install the faas-cli

The next step is installing the faas-cli. If you’re on MacOS and already have homebrew install then installation is as simple as:

brew install faas-cli

Configure faas-cli & Login to the OpenFaaS Dashboard

Configure the faas-cli to use your local OpenFaaS cluster by using the faas-cli login command. If running k3d you’ll need to forward the gateway service port and set the OPENFAAS_URL environment variable:

kubectl port-forward svc/gateway -n openfaas 31112:8080 &
export OPENFAAS_URL=http://127.0.0.1:31112
echo $PASSWORD | faas-cli login --password-stdin

Open a browser and navigate to http://localhost:31112 to load the UI. The UI will prompt for a username and password. The default username is admin and the password is the one you specified in the deployment instructions above, you can print this to your console using echo $PASSWORD.

echo $PASSWORD
681d0e42c1506c260eba6cc73ad61b3330276302

image-20240106121621039

Cheers!!

再次登陆

http://localhost:31112/

export PASSWORD=681d0e42c1506c260eba6cc73ad61b3330276302

别忘了启动docker engine

kubectl port-forward svc/gateway -n openfaas 31112:8080 &

export OPENFAAS_URL=http://127.0.0.1:31112

echo $PASSWORD | faas-cli login --password-stdin

就好了

3. Deploy New Functions

3.1 bug一览 ｜ 排错完整过程（发疯中）

faas-cli template store list
Error while getting templates info: error while requesting template list: Get "https://raw.githubusercontent.com/openfaas/store/master/templates.json": dial tcp [::]:443: connect: connection refused

祈祷：http://grayblog.cn/2020/07/18/解决Mac中Terminal无法访问github/

IP Lookup : 140.82.113.3 (github.com)

sudo vi /etc/hosts
140.82.113.3 www.github.com

他的ipaddress有好多，我就放了第一个https://www.ipaddress.com/ip-lookup

185.199.109.133 raw.githubusercontent.com

终于！！！不行的话再来一遍

beatles@biantongshusMBP ~ % faas-cli template store list

NAME                     RECOMMENDED DESCRIPTION        SOURCE
bash-streaming           [x]         openfaas-incubator Bash Streaming template
dockerfile               [x]         openfaas           Classic Dockerfile template
golang-middleware        [x]         openfaas           HTTP middleware interface in Go
java11-vert-x            [x]         openfaas           Java 11 Vert.x template
node18                   [x]         openfaas           HTTP-based Node 18 template
php8                     [x]         openfaas           Classic PHP 8 template
python3-http             [x]         openfaas           Python 3 with Flask and HTTP
python3-http-debian      [x]         openfaas           Python 3 with Flask and HTTP based on Debian
ruby-http                [x]         openfaas           Ruby 2.4 HTTP template
cobol                    [ ]         devries            COBOL Template
crystal                  [ ]         tpei               Crystal template
crystal-http             [ ]         koffeinfrei        Crystal HTTP template
csharp-httprequest       [ ]         distantcam         C# HTTP template
csharp-kestrel           [ ]         burtonr            C# Kestrel HTTP template
lua53                    [ ]         affix              Lua 5.3 Template
perl-alpine              [ ]         tmiklas            Perl language template based on Alpine image
quarkus-native           [ ]         pmlopes            Quarkus.io native image template
rust                     [ ]         openfaas-incubator Community Rust template
rust-http                [ ]         openfaas-incubator Community Rust template with HTTP bindings
swift                    [ ]         affix              Swift 4.2 Template
vala                     [ ]         affix              Vala Template
vala-http                [ ]         affix              Non-Forking Vala Template
vertx-native             [ ]         pmlopes            Eclipse Vert.x native image template
bun-express              [ ]         openfaas           HTTP-based template using bun
csharp                   [ ]         openfaas           Classic C# template
go                       [ ]         openfaas           Legacy Golang template
golang-http              [ ]         openfaas           Request/response style HTTP template
java11                   [ ]         openfaas           Java 11 template
node                     [ ]         openfaas           Legacy Node 12 template
node12                   [ ]         openfaas           HTTP-based Node 12 template
node14                   [ ]         openfaas           HTTP-based Node 14 template
node16                   [ ]         openfaas           HTTP-based Node 16 template
node17                   [ ]         openfaas           HTTP-based Node 17 template
php7                     [ ]         openfaas           Classic PHP 7 template
powershell-http-template [ ]         openfaas-incubator Powershell Core HTTP Ubuntu:16.04 template
powershell-template      [ ]         openfaas-incubator Powershell Core Ubuntu:16.04 template
puppeteer-nodelts        [ ]         alexellis          A puppeteer template for headless Chrome
python                   [ ]         openfaas           Classic Python 2.7 template
python27-flask           [ ]         openfaas           Python 2.7 Flask template
python3                  [ ]         openfaas           Classic Python 3 template
python3-debian           [ ]         openfaas           Python 3 Debian template
python3-flask            [ ]         openfaas           Python 3 Flask template
python3-flask-debian     [ ]         openfaas           Python 3 Flask template based on Debian
ruby                     [ ]         openfaas           Classic Ruby 2.5 template


faas-cli up --gateway=http://localhost:31112

或

faas-cli build -f ./cpu.yml
faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112

当然了，探索出过程很痛苦，我把我提的github issue挂在这里 https://github.com/openfaas/faas/issues/1831

事到如今，踩坑真得靠自己了

[0] < Building float-operation done in 104.36s.
[0] Worker done.

Total build time: 104.36s
Deploying: float-operation.

Is OpenFaaS deployed? Do you need to specify the --gateway flag?
Put "http://127.0.0.1:8080/system/functions": dial tcp 127.0.0.1:8080: connect: connection refused

Function 'float-operation' failed to deploy with status code: 500

beatles@biantongshusMBP openfaas % faas-cli logs float-operation
Cannot connect to OpenFaaS on URL: http://127.0.0.1:8080

排错：

kubectl get service -n openfaas

faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112

最终成功

beatles@biantongshusMBP openfaas % faas-cli login --username admin --password=681d0e42c1506c260eba6cc73ad61b3330276302 --gateway=http://localhost:31112

WARNING! Using --password is insecure, consider using: cat ~/faas_pass.txt | faas-cli login -u user --password-stdin
Calling the OpenFaaS server to validate the credentials...
credentials saved for admin http://localhost:31112
beatles@biantongshusMBP openfaas % faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112
Deploying: float-operation.

Deployed. 202 Accepted.
URL: http://localhost:31112/function/float-operation

beatles@biantongshusMBP openfaas %

然而遇到not ready

Not Ready

beatles@biantongshusMBP openfaas % kubectl get deploy -n openfaas-fn
NAME              READY   UP-TO-DATE   AVAILABLE   AGE
float-operation   0/1     1            0           5h36m
beatles@biantongshusMBP openfaas % kubectl describe -n openfaas-fn deploy/float-operation
Name:                   float-operation
Namespace:              openfaas-fn
CreationTimestamp:      Thu, 25 Jan 2024 12:34:41 +0800
Labels:                 faas_function=float-operation
Annotations:            deployment.kubernetes.io/revision: 1
                        prometheus.io.scrape: false
Selector:               faas_function=float-operation
Replicas:               1 desired | 1 updated | 1 total | 0 available | 1 unavailable
StrategyType:           RollingUpdate
MinReadySeconds:        0
RollingUpdateStrategy:  0 max unavailable, 1 max surge
Pod Template:
  Labels:       faas_function=float-operation
  Annotations:  prometheus.io.scrape: false
  Containers:
   float-operation:
    Image:      float-operation:latest
    Port:       8080/TCP
    Host Port:  0/TCP
    Liveness:   http-get http://:8080/_/health delay=2s timeout=1s period=2s #success=1 #failure=3
    Readiness:  http-get http://:8080/_/health delay=2s timeout=1s period=2s #success=1 #failure=3
    Environment:
      fprocess:  python index.py
    Mounts:      <none>
  Volumes:       <none>
Conditions:
  Type           Status  Reason
  ----           ------  ------
  Available      False   MinimumReplicasUnavailable
  Progressing    False   ProgressDeadlineExceeded
OldReplicaSets:  <none>
NewReplicaSet:   float-operation-bfd748bd6 (1/1 replicas created)
Events:          <none>
beatles@biantongshusMBP openfaas %

排错过程：

beatles@biantongshusMBP openfaas % kubectl get deploy -n openfaas-fn
NAME              READY   UP-TO-DATE   AVAILABLE   AGE
float-operation   0/1     1            0           5h36m

beatles@biantongshusMBP openfaas % kubectl logs -n openfaas-fn deploy/float-operation
Error from server (BadRequest): container "float-operation" in pod "float-operation-bfd748bd6-4r67p" is waiting to start: trying and failing to pull image

beatles@biantongshusMBP openfaas % kubectl get events -n openfaas-fn \
  --sort-by=.metadata.creationTimestamp
LAST SEEN   TYPE      REASON    OBJECT                                MESSAGE
31m         Normal    Pulling   pod/float-operation-bfd748bd6-p885q   Pulling image "float-operation:latest"
37m         Warning   Failed    pod/float-operation-bfd748bd6-p885q   Failed to pull image "float-operation:latest": rpc error: code = Unknown desc = failed to pull and unpack image "docker.io/library/float-operation:latest": failed to resolve reference "docker.io/library/float-operation:latest": pull access denied, repository does not exist or may require authorization: server message: insufficient_scope: authorization failed
37m         Warning   Failed    pod/float-operation-bfd748bd6-p885q   Error: ErrImagePull
3m28s       Normal    BackOff   pod/float-operation-bfd748bd6-p885q   Back-off pulling image "float-operation:latest"

beatles@biantongshusMBP ~ % docker pull float-operation:latest
Error response from daemon: pull access denied for float-operation, repository does not exist or may require 'docker login': denied: requested access to the resource is denied

https://docs.openfaas.com/deployment/kubernetes/

于是我准备先学一下docker: https://www.youtube.com/watch?v=pg19Z8LL06w

现在我学完了，我又来解决问题来了

3.2 First Python Function

faas-cli template store pull python3-http

faas-cli new float-operation --lang python3-http

部署函数

faas-cli up --gateway=http://localhost:31112

或如下几步

faas-cli build -f ./cpu.yml

build失败可能是网络问题 更换节点可以解决

Here’s how to upload the function to a remote registry (if needed):

docker login -u beatlesbian -p Bts210717! docker.io

faas-cli push -f ./cpu.yml 

faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112

出现了这个问题，找到了 https://skemman.is/bitstream/1946/44391/2/OperatingManual.pdf

beatles@biantongshusMBP openfaas % faas-cli push -f ./cpu.yml 

Unable to push one or more of your functions to Docker Hub:
- float-operation

You must provide a username or registry prefix to the Function's image such as user1/function1

我需要修改yaml文件，啊！我才懂Alex是什么意思image: beatlesbian/float-operation:latest

终于Push成功

latest: digest: sha256:4f6429e67aea67b421804366a4c89ff39be1dc705cd9a58807fcf656399b9cc2 size: 4695
[0] < Pushing float-operation [beatlesbian/float-operation:latest] done.
[0] Worker done.

然而不是200 ok

beatles@biantongshusMBP openfaas % faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112
Deploying: float-operation.

Deployed. 202 Accepted.
URL: http://localhost:31112/function/float-operation

这回终于ready了，然而，我谢谢嘞，我能把所有坑踩遍是吧，我怀疑是 an error in the application，毕竟这也是我第一次来写OpenFaas函数，好吧让我去刷牙洗脸，曙光就在前方，我预感明天我能把所有函数都部署完，然后再考虑auto-scaling的问题，然后上hey插件测试性能，年前就做这些吧，每天保证两小时改论文，画一些简单轻松的小画就可以了

The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there is an error in the application.

这是我修改前的 hanlder.py,这种直接返回估计肯定是不对的

import math
from time import time

def float_operations(n):
    start = time()
    for i in range(0, n):
        sin_i = math.sin(i)
        cos_i = math.cos(i)
        sqrt_i = math.sqrt(i)
    latency = time() - start
    return latency

def handle(event, context):
    n = int(event['n'])
    result = float_operations(n)
    print(result)
    return result
    # return {
    #     "statusCode": 200,
    #     "body": "Hello from OpenFaaS!"
    # }

于是我改成了gpt给我写的，还是不行

这当然就要查看日志了！Your function is crashing due to an error in your code, check the logs. 感谢troubleshooting手册，我们可以很轻松的猜测问题定位在最后一个，当然只是猜测

beatles@biantongshusMBP openfaas % kubectl logs -n openfaas-fn deploy/float-operation
2024/02/07 02:23:31 Version: 0.9.15     SHA: bb7b23f61a2251aa158dac6d409f2fdff383f4f9
2024/02/07 02:23:31 Forking: python, arguments: [index.py]
2024/02/07 02:23:31 Started logging: stderr from function.
.....

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2024/02/07 02:24:48 stderr:   File "/home/app/index.py", line 66, in call_handler
2024/02/07 02:24:48 stderr:     response_data = handler.handle(event, context)
2024/02/07 02:24:48 stderr:                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2024/02/07 02:24:48 stderr:   File "/home/app/function/handler.py", line 16, in handle
2024/02/07 02:24:48 stderr:     n = int(event['n'])
2024/02/07 02:24:48 stderr:             ~~~~~^^^^^
2024/02/07 02:24:48 stderr: TypeError: 'Event' object is not subscriptable
2024/02/07 02:24:48 POST / - 500 INTERNAL SERVER ERROR - ContentLength: 265B (0.0043s)
beatles@biantongshusMBP openfaas %

The function handler is passed two arguments, event and context.

  • event contains data about the request, including: - body - headers - method - query - path

  • context contains basic information about the function, including: - hostname

问题就出现在event上

n = int(event.body)

I want to test my function without deploying it，尝试一下吧！Then invoke your function via http://127.0.0.1:8081

faas-cli build -f ./cpu.yml
docker run -p 8081:8080 \
  --rm \
  --name float-operation \
  -ti beatlesbian/float-operation:latest

终于成功了！

image-20240207114325042

至此我认为我已经踩完大部分坑了。

3.3 Add Second Function

faas-cli new pyaes --lang python3-http --append cpu.yml

2024/02/07 08:38:07 stderr:     import numpy as np
2024/02/07 08:38:07 stderr: ModuleNotFoundError: No module named 'numpy'

缺包可能需要修改dockerfile, 添加RUN ....，再手动build

docker build -t beatlesbian/pyaes:latest ./build/pyaes

然后继续，成功了

faas-cli push -f ./cpu.yml

faas-cli deploy -f ./cpu.yml --gateway=http://localhost:31112

排错常用

kubectl logs -n openfaas-fn deploy/pyaes

对于缺包我做了如下补充：PIL

RUN pip install Pillow
RUN pip install requests

https://blog.csdn.net/qq_28304687/article/details/76551196

根据论文，我现在要把这些都添加完，明天测试openFaas可扩展性，并安装插件

pyaes

RUN pip install pyaes

# test
{
    'length_of_message': 4,
    'num_of_iterations': 5
}

event_body = json.loads(event.body.decode("utf-8"))
length_of_message = event_body['length_of_message']
num_of_iterations = event_body['num_of_iterations']

{'message': '69wc', 'ciphertext': b'\xb6 \xbf"', 'latency': 0.0022983551025390625}
  • TypeError: Object of type bytes is not JSON serializable OpenFaas简单的事例，并没有演示出来event.body是字节码类型，还要靠自己反复摸索，解决方案最终如上，好在可以举一反三了

FunctionBench workloads

1. CPU & Memory

  • ⭐️Float Operations(sin, cos, sqrt) done

  • ⭐️MatMul(square matrix multiplication) done

  • ⭐️Linpack(solve linear equations Ax = b) done

  • ⭐️Image Processing

  • ⭐️Video Processing

  • MapReduce

  • Chameleon

  • ⭐️pyaes done

  • Feature Generation

  • ⭐️Model Training

  • Model Serving

    • Video Face Detection - Cascade Classifier
    • Classification Image - CNN
    • Generating Names- RNN
    • Prediction Reviews - LR
2. Disk
  • ⭐️dd
  • ⭐️gzip-compression
3. Network
  • iPerf3
  • Cloud storage service download-upload
  • json serialization deserialization
# from google.cloud import storage
from PIL import Image, ImageFilter
from time import time
import json
import os

TMP = "/tmp/"
#输入的image, file_name, 输出的filename需要斟酌

# left-right + top-bottom
def flip(image, file_name):
    path_list = []
    path = TMP + "flip-left-right-" + file_name
    img = image.transpose(Image.FLIP_LEFT_RIGHT)
    img.save(path)
    path_list.append(path)

    path = TMP + "flip-top-bottom-" + file_name
    img = image.transpose(Image.FLIP_TOP_BOTTOM)
    img.save(path)
    path_list.append(path)

    return path_list

# rotate 90 180 270
def rotate(image, file_name):
    path_list = []
    path = TMP + "rotate-90-" + file_name
    img = image.transpose(Image.ROTATE_90)
    img.save(path)
    path_list.append(path)

    path = TMP + "rotate-180-" + file_name
    img = image.transpose(Image.ROTATE_180)
    img.save(path)
    path_list.append(path)

    path = TMP + "rotate-270-" + file_name
    img = image.transpose(Image.ROTATE_270)
    img.save(path)
    path_list.append(path)

    return path_list

# filter
def filter(image, file_name):
    path_list = []
    path = TMP + "blur-" + file_name
    img = image.filter(ImageFilter.BLUR)
    img.save(path)
    path_list.append(path)

    path = TMP + "contour-" + file_name
    img = image.filter(ImageFilter.CONTOUR)
    img.save(path)
    path_list.append(path)

    path = TMP + "sharpen-" + file_name
    img = image.filter(ImageFilter.SHARPEN)
    img.save(path)
    path_list.append(path)

    return path_list

def gray_scale(image, file_name):
    path = TMP + "gray-scale-" + file_name
    img = image.convert('L')
    img.save(path)
    return [path]

def resize(image, file_name):
    path = TMP + "resized-" + file_name
    image.thumbnail((128, 128))
    image.save(path)
    return [path]

# upon 5 image processing actions
def image_processing(file_name, image_path):
    path_list = []
    start = time()
    with Image.open(image_path) as image:
        tmp = image
        path_list += flip(image, file_name)
        path_list += rotate(image, file_name)
        path_list += filter(image, file_name)
        path_list += gray_scale(image, file_name)
        path_list += resize(image, file_name)

    latency = time() - start
    result = {
        'path_list': path_list,
        'latency': latency
    }

    return result

# file_name, image_path
def handle(event, context):
    image_path = str(event.body)
    file_name = os.path.basename(image_path)
    result = image_processing(file_name,image_path)
    return {
        "statusCode": 200,
        "body": json.dumps(result)
    }

Kubeedge

multipass launch --name kubeedge1 --memory 4G --disk 8G

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mfbz.cn/a/381962.html

如若内容造成侵权/违法违规/事实不符，请联系我们进行投诉反馈qq邮箱809451989@qq.com，一经查实，立即删除！

相关文章

灰度发布浅见

灰度发布浅见

在之前的稳定性生产文章中有一项对于研发人员比较重要的措施是变更管控&#xff0c;关于变更管控其实在实际生产活动中有很多措施&#xff0c;因为对于不太的行业&#xff0c;其行业特点和稳定性生产的要求也不一样&#xff0c;例如下图&#xff0c;我们可以看到信通院调研的不…
阅读更多...
[职场] 大厂群面的基本题型 #学习方法#其他

[职场] 大厂群面的基本题型 #学习方法#其他

大厂群面的基本题型 大厂群面的基本题型 群面&#xff0c;又叫做“无领导小组面试”。历年来是企业校招时&#xff0c;进行大批量刷人的有效方法。流行于互联网、快消、银行、四大等多个行业。因为难度大、情况复杂、淘汰率高&#xff0c;又被称为“死亡面试”。 无领导小组…
阅读更多...
微信小程序（四十）API的封装与调用

微信小程序（四十）API的封装与调用

注释很详细&#xff0c;直接上代码 上一篇 新增内容&#xff1a; 1.在单独的js文件中写js接口 2.以注册为全局wx的方式调用接口 源码&#xff1a; utils/testAPI.js const testAPI{/*** * param {*} title */simpleToast(title提示){//可传参&#xff0c;默认为‘提示’wx.sho…
阅读更多...
CSS3 基本语法

CSS3 基本语法

CSS3 基本语法 1. CSS3 新增长度单位 rem 根元素字体大小的倍数&#xff0c;只与根元素字体大小有关。vw 视口宽度的百分之多少 10vw 就是视口宽度的 10% 。vh 视口高度的百分之多少 10vh 就是视口高度的 10% 。vmax 视口宽高中大的那个的百分之多少。&#xff08;了解即可&am…
阅读更多...
【复现】泛微云桥 e-Bridge SQL注入漏洞_44

【复现】泛微云桥 e-Bridge SQL注入漏洞_44

目录 一.概述 二 .漏洞影响 三.漏洞复现 1. 漏洞一&#xff1a; 四.修复建议&#xff1a; 五. 搜索语法&#xff1a; 六.免责声明 一.概述 泛微云桥&#xff08;e-Bridge&#xff09;是上海泛微公司在”互联网”的背景下研发的一款用于桥接互联网开放资源与企业信息化系…
阅读更多...
AI新工具(20240210) Osam - Osam是一个启用本地运行的开源llm；Whishper - Whishper是一个开源的语音工具

AI新工具(20240210) Osam - Osam是一个启用本地运行的开源llm；Whishper - Whishper是一个开源的语音工具

Osam - Osam是一个启用本地运行的开源“一切分割”模型工具&#xff0c;支持多种接口和自定义视觉模型。 Osam是一个开源工具&#xff0c;它允许本地运行“可对任何内容进行分割”的模型(Segment-Anything Models)&#xff0c;灵感来源于Ollama。使用Osam&#xff0c;用户可以…
阅读更多...
猪圈密码.

猪圈密码.

1.介绍 又称朱高密码、共济会密码、共济会暗号、共济会员密码&#xff0c;是一种以格子为基础的简单替代式密码。即时使用符号&#xff0c;也不影响密码分析&#xff0c;亦可用其他替代式密码。 2.产生背景 这是一种外形古怪的密码&#xff0c;已经传递了几百年。没有人明确…
阅读更多...
Minecraft的红石教程之电梯

Minecraft的红石教程之电梯

一.前言 我记得是上初中的时候&#xff0c;就看到了这类电梯。现在我在看现在这类电梯的相关视频&#xff0c;大多是盗用创意未能领会其中的红石运作规律&#xff0c;于是我就删繁就简写了这篇。 二.步骤 1.材料 粘性活塞&#xff0c;黏液块&#xff0c;红石&#xff0c;红…
阅读更多...
洛谷p4391 无限传输

洛谷p4391 无限传输

考察字符串周期的题 题目链接 结论 要求字串 s s s的最短循环字串长就是&#xff1a; a n s n − p m t [ n ] ansn-pmt[n] ansn−pmt[n] 证明如下&#xff1a; 这是最大的前缀和后缀 现在我们做如下操作&#xff1a; 补全字段 a a a和字段 b b b&#xff0c;按子段 a a a的…
阅读更多...
Javaweb之SpringBootWeb案例之事务管理的详细解析

Javaweb之SpringBootWeb案例之事务管理的详细解析

1. 事务管理 1.1 事务回顾 在数据库阶段我们已学习过事务了&#xff0c;我们讲到&#xff1a; 事务是一组操作的集合&#xff0c;它是一个不可分割的工作单位。事务会把所有的操作作为一个整体&#xff0c;一起向数据库提交或者是撤销操作请求。所以这组操作要么同时成功&am…
阅读更多...
第三百一十六回

第三百一十六回

[tod] 我们在上一章回中介绍了"如何在输入框中处理光标"相关的内容&#xff0c;本章回中将介绍如何添加输入框默认值.闲话休提&#xff0c;让我们一起Talk Flutter吧。 1. 概念介绍 在项目中经常使用输入框获取用户输入的内容&#xff0c;有时候在输入框中反复输入相…
阅读更多...
多模态知识图谱：感知与认知的交汇

多模态知识图谱：感知与认知的交汇

目录 前言1 多模态知识图谱的概念1.1 感知系统与认知系统的连接1.2 信息形式的整合与融合1.3 全面、多维度的认知基础 2 多模态的作用2.1 模态的知识互补2.2 模态实体消歧2.3 模态语义搜索2.4 知识图谱补全2.5 多模态任务增强 3 多模态知识图谱发展历史3.1 初期模态数据整合3.2…
阅读更多...
数据结构——5.4 树、森林

数据结构——5.4 树、森林

5.4 树、森林 概念 树的存储结构 双亲表示法 孩子表示法 孩子兄弟表示法&#xff08;二叉树表示法&#xff09;&#xff1a; 二叉树每个结点有三个变量 ① 二叉树结点值&#xff1a;原树结点的值 ② 二叉树左孩子&#xff1a;原树结点的最左孩子 ③ 二叉树右孩子&#xff1a…
阅读更多...
【十四】【C++】list 的常见用法

【十四】【C++】list 的常见用法

list 的初始化和遍历 /*list的初始化和遍历*/ #if 1 #include <list> #include <vector> #include <iostream> #include<algorithm> using namespace std;void TestList1(){list<int> L1;list<int> L2(10, 5);vector<int> v{1,2,3,4…
阅读更多...
实战案例：将已有的 MySQL8.0 单机架构变成主从复制架构

实战案例：将已有的 MySQL8.0 单机架构变成主从复制架构

操作步骤 修改 master 主节点 的配置&#xff08; server-id log-bin &#xff09;master 主节点 完全备份&#xff08; mysqldump &#xff09;master 主节点 创建复制用户并授权master 主节点 将完全备份文件拷贝至从节点修改 slave 从节点 的配置&#xff08; server-id rea…
阅读更多...
01 MySQL概念

01 MySQL概念

文章目录 数据库MysqlSQL语言 数据库 数据库 &#xff1a; 按照数据一定结构&#xff0c;存储管理数据的仓库。数据库是在数据库管理系统管理和控制下&#xff0c;在一定介质上的数据集合。数据库管理系统 &#xff1a; 管理数据库的软件&#xff0c;用于建立和维护数据库。关…
阅读更多...
社区店经营管理新思路：提升业绩的秘诀

社区店经营管理新思路：提升业绩的秘诀

作为一名资深的鲜奶吧创业者&#xff0c;我深知在社区经营一家店铺所面临的挑战与机遇。经过5年的探索与实践&#xff0c;我总结出了一套提升社区店业绩的秘诀&#xff0c;今天就和大家分享一下。 一、明确目标客户群体&#xff0c;精准定位 在社区开店&#xff0c;首先要明确…
阅读更多...
【Wio Terminal教程】使用LCD屏幕（3）

【Wio Terminal教程】使用LCD屏幕（3）

使用LCD屏幕&#xff08;3&#xff09; 一、加载图片1、安装库2、 图像格式配置3、开始 二、线图1、安装库2、开始 三、直方图1、安装库2、开始 一、加载图片 本节将讲述如何在 Wio Terminal 上从 SD 卡加载并显示图像到 TFT LCD 屏幕。这对于你的设计可能是一个非常有用的实现…
阅读更多...
C语言字符串常量

C语言字符串常量

字符串常量 字符串常量在内存中的存储&#xff0c;实质是一个匿名数组匿名数组&#xff0c;同样满足数组两种涵义的规定示例&#xff1a; printf("%d\n", sizeof("abcd")); // 此处 "abcd" 代表整个数组 printf("%p\n", &"…
阅读更多...
038 什么是面向对象

038 什么是面向对象

面向过程&面向对象 什么是面向对象 现实世界中的事物、类、对象之间的关系 在我们想通过计算机解决一个具体问题的时候&#xff0c;我们可以研究与问题有关事物的共性&#xff0c;比如我在观察了大量的杯子后得出一些结论&#xff1a;杯子都应该有材质、颜色、尺寸、形状这…
阅读更多...
最新文章

Copyright @ 2022~2023

友情链接： 我的编程经验分享 一条长河网 尧图网站开发 尧图建网站